Industrial CO2 Laser Gantry Cutter
Thank you for your interest in our Laser Cutting/Engraving Systems...
New for 2009 is our Large Laser Gantry Cutter. With a Usable Bed Size of 67” x 276” (5.6 x 23 Feet!), this machine was designed for the fabric industry in mind where large rolls of material are used in the manufacture of Parachutes, Sails, Gas bags, Clothing, etc. The system is also well suited for cutting many other materials such as Plastics, Leather, Wood, Gasket Materials, Fiberglass Cloth, Veneers, Acrylic, etc.
Our goal in the design and manufacture of this system was to offer the end user with with a machine unmatched in Size, Quality, Performance and Price. The system is made entirely of Aerospace-Grade Aluminum and Stainless Steel throughout. It incorporates a 3hp Vacuum System merged with the unique stainless steel vacuum boxes under the entire honeycomb bed of the machine which effectively removes all smoke and fumes from your work environment while simultaneously holding your material tight to the cutting bed. The fully adjustable leveling feet allow the machine to be setup on uneven surfaces. The entire machine deck and understructure are constructed of 316 Stainless Steel for long life and resilience to rust and corrosion. The 2” thick Aluminum Honeycomb Bed is divided into twelve sections that can be easily removed for cleaning.
At the heart of our system is the accuracy of the drive controller and motors, all made in USA. A Hand-Held Control Panel is used by the operator to control all aspects of the machine through it's LCD Display and Membrane Function Keys. The Control Panel will reach any corner of the machine. The controller has a 32 Megabyte Memory Buffer to hold jobs. Once the Jobs are sent from the PC to the controller the computer is no longer required. There is no need to learn special software with our machine. You simply “Print” directly to the machine from your native design software such as AutoCAD, Illustrator, Corel Draw, etc.
The system can be purchased with several laser options from 70 to 180 Watts. These Premiunm Laser Tubes are refillable and have a 10,000 Hour Lifespan. The entire system including Laser, Electronics, Motors, Bearings, Drive Components, etc. are Warranted by us for a period of One Year from the installation date. The Warranty is Bumper to Bumper.
We use only the highest quality, Aerospace-Grade materials in the manufacture of our systems, which are custom made to order, here in the USA. Having the added benefit of substantial cost savings to you, our systems produce output with equal or better quality of that produced by any other "Off The Shelf" machine, while giving you a Larger Bed Size, More Laser Power, and Industrial Quality throughout... Please review our Video Section to see for yourself. We pride ourselves on the quality of our machines, hand crafted in the USA...
We incorporate the best quality US-Made Laser Controller which provides ease of operation and exceptional functionality and accuracy. Our Print Driver is made here in the USA and supports most all of the standard Windows-Based software commonly used to create CAD drawings including AutoCAD® and Corel Draw® to name a few. You simply "Print" to the machine's Memory Buffer then all printing and engraving functions are controlled direct from the machine.
We provide real tech-support for our product, something you are Unlikely to get with an imported laser machine... We also provide a 1-Year Bumper to Bumper Warranty, Including All Electronics, Power Supplies, Software and the Laser Tube Itself. That is also something you will Not get with an Imported laser machine.
Please feel free to contact us for any further information. We would be happy to arrange a System Demo here at our facility in Orlando, FL., or provide you with customer references across the US that would be happy to answer any and all questions regarding our machines. We will also quote the manufacture of your "Custom" machine, designed and built especially for your particular application.
67” x 276"
(5.6 x 23 Feet)
Weight: Approximately 2000 lbs
Construction: All Stainless Steel and Aircraft Aluminum (Standard)
Power Requirements: 120 vac (Two 20 amp circuits required, 240 Volt also available)
Laser Power: 70, 100, 130, 150, or 180 Watt Premuium Sealed CO2 Laser (10,000 Hour Lifespan)
Mechanical Resolution: .0003” Mechanical Repeatability: .001”
Raster at various
DPI Levels up to 1000
Laser Cooling: Water Cooled (Complete cooling system with Tank, Pumps, and Refrigerated Chiller included)
Vacuum System: Dual 1.5 HP Vacuum Systems -w- six under-table attachment points (Standard)
Pointer Beam: Red Diode Beam Combiner (Standard)
Cutting Nozzle: Computer-Controlled Gas-Assist Cutting Nozzle (Standard)
User Interface: Handheld Control Panel with 4x20 Character LCD Display...
Panel will reach all four corners of the machine)
MegaByte Onboard Memory Buffer
Software Interface: Print directly to the machine's memory buffer from AutoCAD, CorelDraw, Illustrator, etc. (No Special Software to learn...) Once files are on the machine, they are managed from the handheld control panel and the computer is no longer needed. Pen Support: Supports Ten Different Pen Colors. (Ten different colors can be used in your drawings and each color can be programmed for its own speed and power settings) These can all be mixed and matched in one drawing... Other Features: Standard Gas-Assist Laser Cutting Nozzle provides a jet of compressed gas coaxial with the focused laser beam. This provides a superior edge quality when cutting thicker materials such as Wood, Plastic, Formica, Leather, Acrylics, etc. Red Pointer Diode Laser Merged with the CO2 Laser Optics. (For Beam Alignment and precision alignment with workpiece if required) Machine can also work in Raster Mode in the Y-Axis. This enables you to Print Text, Images, Pictures, etc. with 1000 DPI Resolution. Raster and Vector operation on the same file or workpiece. (Cut and Engrave in one pass)
and Vector Mixed-Mode Output
$Call for current pricing
6 to 8 Weeks. 50% Deposit Due to place order, Balance Due when unit is ready to ship...
Shipping Cost: Customer is responsible for all shipping costs... A detailed shipping quotation will be supplied upon request. Installation & Training: Installation at your facility is included in the purchase price of the machine, excluding our airfare, hotel and rental car. We will assemble the machine at your facility and provide two days of training to you or your staff. Printable Spec Sheet: Specifications.pdf
Cutting 1000 Denier Cordura Nylon Fabric
Last Updated on 03/04/2010
This Site Best Viewed at 1024x768 or Greater